Datasheet
LED Transformers
LED Transformer 120W 24VDC
Electronic Transformers for low-voltage LED application
High frequency, compact size and Long lifetime LED Transformer, operation with
24VDC LED module, LED Strip and other LED application where need 24VDC
constant voltage.
Product features and Benets
• Optimal performance thanks to
the dedicated LED solution
• Long lifetime, 30,000 hours
• Safe operation, SELV
compliant, CB
• Complete protection, Overload,
short circuit, overheat protection
• Installation friendly,
Independent and Class II
• ENEC, CQC, CE, CB certicate
• Applications
• Hotel, partially light the space,
Living rooms, Corridors
• Retail & Shopping Mall, Cabinet
or shelf lighting
• Restaurant, Enhance the
ambience, create the mood
• Decoration, Create space and
layers, light sculpture
Quality
We ensure optimum
quality regarding:
• System supplier
As manufactures of lamps and
gear, Philips ensures that, from
the earliest development stage,
optimum LED light source and
gear performance is designed
• International supplier
Philips LED transformer fully
comply with SELV standards,
IEC 61347-1, IEC 61347-213
LED Transformer
120W 24VDC
LED
N
1
L ø L
+
+
N ø
2
3
4
+
5
-
-
6
-
7
Electrical input data
Electrical output data
Wiring & Connections
Logistical data
Specication item Value Unit Condition
Rated input voltage range 220 ... 240 Vac Performance
Rated input voltage range 202 ... 254 Vac Operational
Rated input frequency 50 ... 60 Hz Performance
Rated input frequency 45 ... 66 Hz Operational
Rated input current 0.60 A 230Vac, full load
Rated input power 140 W 230Vac, full load
Power factor ≥ 0.95 230Vac, full load
Power factor ≥ 0.90 230Vac, 50% load
Total harmonic distortion ≤ 20 % 230Vac, full load
Eciency ≥ 85 % 230Vac, full load
Specication item Value Unit Condition
Regulation method Constant Voltage Rated output voltage: 24Vdc
Output voltage range 22.8 ... 25.2 Vdc
Output current range 0.1 ... 5.0 Adc
Output short-circuit current < 18.2 / 6.3 Ap / Arms Hiccup mode
Output voltage ripple < 5 %
Output power range 36 ... 120 W
Line regulation < 1 %
Load regulation < 5 %
Turn-on delay < 1 s
Output voltage rise time < 30 ms
Hold-up time > 10 ms
Specication item Value Unit Condition
Input wire cross-section 0.75...2.5 mm
2
Solid wire, 300 +/- 10mm length
Input cable diameter 3.3…8 mm
18 AWG
Input wire strip length 6…7 mm
Output wire cross-section 0.75...2.5 mm
2
Solid wire, 300 +/- 10mm length
Output cable diameter 2…5 mm
18 AWG
Output wire strip length 6…7 mm
Maximum output cable length 1.0 m CISPR15: between driver and LED module/Strip
Specication item Value
Product name LED Transformer 120W 24V 220V/240V
European Order code 694793910202000
Logistic code 12NC 9137 100 32567
Pieces per box 20pcs
*: The LED transformer is intended for independent indoor use only.
The driver should not be directly exposed to the elements like snow, water and ice.
Insulation
Insulation Mains LED
Mains N/A SELV (double)
LED SELV (double) N/A
Dimensions and weight
Operational temperatures and humidity
Specication item Value Unit Condition
Length (A1) 300.0 mm
Width (B1) 40.0 mm
Height (C1) 30.0 mm
Fixing hole distance (A2) 290.0 mm
Fixing hole diameter (D1) 4.0 mm
Weight 400 gram
Specication item Value Unit Condition
Driver ambient temperature -20...+50 °C
Maximum housing temperature 90 °C
Relative humidity * 10...90 % Non-condensing
Noise and hum ≤ 20 dB
Driver IP rating IP20 Driver is for independent use
A2
A1
B2 B1
C1
Storage temperature and humidity
Certicates and standards
Lifetime
Specication item Value Unit Condition
Ambient temperature -30...+80 °C
Relative humidity 5...95 % Non-condensing
Specication item Value
Approval marks CE / ENEC / CCC / SELV/ F / CB
Specication item Value Unit Condition
Rated driver lifetime 30,000 hours Driver Tamb ≤ 50°C
Maximum failures = 10%
Features
Inrush current
Specication item Value Remark Condition
Open load protection N.A. Automatic recovering
Short-circuit protection Yes Automatic recovering
Overheat protection N.A. (indicate max temp to stop driver Automatic recovering
Overload protection Yes Automatic recovering
Hot wiring Yes
Suitable for insulation class applications II Per IEC60598
Specication item Value Unit Condition
Inrush current Ipeak 35 A Input voltage 230Vac
Inrush current Twidth 320 µs Input voltage 230Vac, measured at 50% Ipeak
Typical number of drivers Max. 12 pcs MCB 16A B type, mains impedance 200mΩ + 400µH
MCB Rating Relative number of LED drivers *
B 6A 37%
B 10A 63%
B 13A 81%
B 16A 100%
B 20A 125%
B 25A 156%
C 6A 63%
C 10A 104%
C 13A 135%
C 16A 170%
C 20A 208%
C 25A 260%
D 6A 125%
D 10A 104%
D 13A 135%
D 16A 170%
D 20A 208%
*: Please check that cable cross sectional area corresponds with MCB rating
Ipeak
Twidth
www.philips.com/technology
©2017 Philips Lighting Holding B.V. All rights reserved. This document contains information
relating to Philips Lighting product portfolio. Note that the information provided is subject
to change. Philips Lighting does not give any representation or warranty as to the accuracy
or completeness of the information included herein and shall not be liable for any action
in reliance thereon. The information presented in this document is not intended as any
commercial oer and does not form part of any quotation or contract. Trademarks are the
property of Koninklijke Philips N.V., Philips Lighting Holding B.V. or their respective owners.
Driver touch current
Specication item Value Unit Condition
Typical touch current < 0.7 mA peak Acc. IEC61347-1 at 230Vac 50/60Hz
LED module contribution not included
Surge immunity
Specication item Value Unit Condition
Mains surge immunity (di. mode) 1.0 / 0.5 kV / kA L-N, acc. IEC61000-4-5. 2 Ohm, 1.2/50µs, 8/20µs
Mains surge immunity (comm. mode) 2.0 kV L/N – GND acc. IEC61000-4-5. 12 Ohm, 1.2/50µs, 8/20µs
